Машина за екстракцију калијума хуминске киселине

▍

The ertilizer industry humic acid purification decanter centrifuge machine make use of the principle of sedimentation to separate suspension of solid - liquid continuously. The solid phase discharing by the spiral contiunously.

▍

This machine is a continuous and efficient solid - liquid separation equipment, has the following features:

1. wide range of applications: because of good adaptation to the material ,it can be widely used in chemical industry, light industry, food, paper, mining and other industrial sectors for the suspension of solid phase weight concentration of Less than or equal to 10 percent (or 24 hours after free-falling volume concentration of Less than or equal to 50 percent ), solid particle equivalent diameter of the liquid-solid Greater than or equal to 0.005 ~ 2mm,severe difference Greater than or equal to 0.05 g / cm3 suspension of liquid-solid separation.Such as calcium carbonate, calcium sulfate, chloride, lees,bean dregs, soybean protein, paper pulp, vegetable oil, kaolin, lime mud, and environmental protection industries sludge sedimentation and centrifugation suitable for all kinds of chemical products and other materials can be effectively dehydration.
3. The machine uses dual-frequency control, can be used for variable speed, in order to make the machine to achieve optimum performance.
5. The machine is compact, small footprint, easy installation, simple maintenance, wearing parts - the outer spiral spray high levels of tungsten carbide, greatly improving wear resisting, life doubled.

The purpose of separation is to separate out substances with different mass ratios from mixed fluid.Separation forms included solid-liquid separation,liquid-liquid separation and liquid-liquid-solid separation.

T

▍

▍

1. Industrial design

2. Effectively ease resonance during rotating of bi-rotor

When centrifuge works,there is no obvious first-order and two-order resonance regions within designed speed range,meanwhile ,whole vibration intensity of bearing seat is definited within 2mm/s-4mm/s.All of this eliminates extra fatigue damage to components and assembly units from high frequency vibration during operation and sudden vibration when shut down.

3. Thoroughly eliminate phenomenon of liquid ring stalling

Phenomenon of liquid ring stalling happens during heavy duty boot or shutdown process of complete set machine,especially for LW550 and even larger models,It would makes bounce or wild shake,causes extra impact fatigue damage to main bearings,screw bearings and inner parts of rotary bowl.Fortunately ,our engineers have solved this problem thoroughly.

4. Unique technique adopt in main component work-blanks

The manufacturing methods of main component work-blanks are adopt centrifugal casting technique and overall mould-making forging technique,thoroughly avoid risks such as inter-granular corrosion and relaxation of residual stress release in welding joint.

5. Main bearing selection

We use origin bearings of international first-line brands such as SKF,FAG and so on.

6. Constant temperature detection

7. Inter-change ability

▍

▍

▍

Shenzhou Centrifuge has been developing and manufacturing centrifuges for nearly 40 years, and is one of the Chinese leading manufacturer. Shenzhou Centrifuge has more experience and expertise than any other separator manufacturer when it comes to applying and using decanter centrifuge for the purpose of continuous separation.

​

​

​

Popularne oznake: